TWO ( 2 )Buddy Bracket - No Cord Includes Buddy Bracket right angle bracket (1) 1/4 20 screw with washer (1) 1/4 20 male / female adaptor with washer Note: Hot Shoe Female cord not included

Buddy Bracket - No Cord Includes Buddy Bracket right angle bracket (1) 1/4 20 screw with washer (1) 1/4 20 male / female adaptor with washer Note: Hot Shoe Female cord not included

Canon pretrigger No-switch The Pre-trigger cord keeps the camera "awake" ready for the shot. Same mode as pressing the shutter half way down. The only way to view your pictures is to unplug the cord from the camera.. Depending on the way you shoot you may or may not need the switch. The camera will remain awake and use up more power

canon3p-pw canon remote cord to Pocketwizard This cord will focus the camera and fire each time the Pocketwizard transmitter button is pushed. If you want the camera to stay awake you must set the camera to stay awake in the settings.

Canon Pretrigger cord-With Switch The Pre-trigger cord keeps the camera "awake" ready for the shot. Same mode as pressing the shutter half way down. The only way to view your pictures is to unplug the cord from the camera.. Depending on the way you shoot you may or may not need the switch. The camera will remain awake and use up more power

Cat# SD-CSA Includes: Strobe Dolly with extender arm with 1/4 20 metal thread and thumb screw Extender arm Has 1/4 20 metal thread and thumb screw

Cat# DSD-1T Double Strobe Dolly with Transmitter mount. . . . . . . . .Includes: (1) Double Strobe Dolly with metal threaded mounting for lightstand adapter. - (1) Cold shoe with 1/4 20 metal mount, (1) Extender arm. with 1/4 20 (3) camera screws, (3) 1/8 in rubber washers. Pictured Strobes, Pocket Wizard and Y Cord ( Not included )

Cat# DSD-3T Includes "Double Strobe Dolly" transmitter mount and 3 "Xtend Arms" 6 thumb screws and washers . With this bracket and a Y cable the setup will give you a one stop increase in light when using two flashes (at maximum power on manual), by setting both flashes at half the required power, recycle time is cut in half from what it would be when using only one flash.

9 inch ( straight cord ) Turbo cord for Canon

DSD Double Strobe Dolly Mounts ( 2 ) strobes to lightstand 4 sliding slots , includes (2) camera screws and (2 ) rubber washers

Cat# DSD1-HSFMSKL Strobe Dolly DSD bracket, Xtend arm, Hot shoe female cord with Screw-Locking PC

DSD-2-YHS Double Strobe Dolly, and "HS Y cord" , ("T mount) and 3 "Xtend Arm

Cat# DSD-3T-YHS Includes "Double Strobe Dolly" T Cord to fire 2 Hot shoe flashes, transmitter "T mount" and 3 "Xtend Arms" 6 thumb screws and washers . With this bracket and a Y cable the setup will give you a one stop increase in light when using two flashes (at maximum power on manual), by setting both flashes at half the required power, recycle time is cut in half from what it would be when using only one flash. ( Note: Pocket Wizard pictured is not included )

Double Strobe Dolly, and Y cord, 2 thumb screws with rubber washers. This bracket and cable will give you a one stop increase in light when using two flashes (at maximum power on manual), by setting both flashes at half the required power, recycle time is cut in half from what it would be when using only one flash. This Pocket wizard can be hung with the lanyard. The arm to hold the transmitter can be ordered later if you decide to.

Allows you to mount two strobes to your lightstand with an Umbrella. Portable studio quality lighting , that's totally portable. Small enough to tuck the bracket away in your camera bag. Fills your umbrella with light and more coverage. Two strobes really fill your umbrella. Two strobes means half the recycle time ( with the same power) on 1/2 power setting. The increase of power will also give you better F stop settings. This unit is small enough to pack away in your camera bag and will provide you with years of trouble free service.

DSUB umbrella bracket with 2 cold shoes

Double Strobe Umbrella Bracket with Hot Shoe Female Y cord included. Y cord has 2 Hot shoe female to miniphone. Allows two strobes with radio remote. Hot Shoe Female cord has 2 ft. spread

Ebay E-TTL Cord upgrade Ettl cord supplied by us

Cat # HSFM-P Hot shoe female to PC 9 inches

Cat# HSFM-SKL Hot shoe female to Canon/Nikon Screw-locking PC 1 foot straight cord. 1/4 20 threaded for mounting. If you add the EZspin option, a plastic cover is molded around the metal threaded colar. This increases the diameter of the colar and adds a wider grip between thumb and index finger.

Nikon 10 pin to Miniphone Pretrigger cord

Nikon Pre-trigger cord / with switch

The Pre-trigger cord keeps the camera "awake" ready for the shot. Same mode as pressing the shutter half way down. The only way to view your pictures is to unplug the cord from the camera.. Depending on the way you shoot you may or may not need the switch. The camera will remain awake and use up more power

Pre-trigger cords ( With Switch ) This cord also keeps the camera "awake" ready for the shot. When you want to view the photos, Switch off the pretrigger and the camera operates normally as if no cord were in the camera. You can now view and edit your pictures normally. Turn the switch back on, the camera focuses. You are ready for your next photo session. Turn switch off, camera is able to sleep saving power. Also less ware and tare on camera and cord from constant unplugging