Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

 


Paramount Cords
720 E 239th Street
Bronx, N.Y. 10466
ph.  718-325-9100
fax  718-325-9813

 

 

 

 

 


 



 

Microsync Digital Cords

           MicroSync Digital Transmitter / Receiver Kit with Mono Plug

Microsync Transmitter mount              $47.00

This adaptor attaches MS transmitter to Canon PC
Allows you to use your 580EX or other Canon flash with Microsync Transmitter
Truly wireless. Very stealthy. Securely locks in with screwlocking PC
( not many know that canon has a screw in PC )  call to order

Click Flashing star To buy           


Tip
# 29 2.5mm Submini for MicroSync

MS-MA1 Elinchrom to Submini (2.5MM) (for Microsync)






MS-ME1-6P Metz 6-Pin to Submini (2.5MM) Microsync (16 inches)
MS-ME1-8P Metz 8 to Submini (2.5MM) Microsync (16 inches)
MS-MH1 Household to Submini (2.5MM) MicroSync (16 inches)
MS-MH10 Household to Submini 2.5MM) MicroSync (10 Feet)
MS-MH3 Household to Submini (2.5MM) MicroSync (3 Feet)
MS-MHSF1 Hot Shoe Female to (2.5MM) MicroSync (1 Foot)
MS-MP1 1/4"(Monolite) to (2.5MM) (Microsync) (16 Inches)
MS-MP3 1/4" Monolite to (2.5MM) MicroSync (3 Feet)
MS-MPCF PC Female Adapter to (2.5MM) MicroSync Adaptor
MS-MS1 Sunpak to (2.5MM) MicroSync (16 inches)
MS-MV1 Vivitar to (2.5MM) MicroSync (16 inches)
MS-PC1 PC to (2.5MM) MicroSync (16 inches)
MS-PC10 PC to (2.5MM) Microsync (10 FT Straight)
MS-PC5 PC to (2.5MM) MicroSync (5 Foot Coil)
MS-PC5H PC Long Tip to (2.5MM) MicroSync (5 Foot Coil)
MS-PC5N Nikon Screwlock to (2.5MM) MicroSync (5 Ft Coil)
MS-Canon3P  Canon remote pretrigger cord

Description:

Radio Slave Receiver Radio Slave Transmitter with Hot Shoe Mount Paper Clip for changing frequencies Lanyard 2 x AA Batteries CR2032 Battery

 

Specification:

The MicroSync Digital wirelessly fires strobes and cameras.
 
  • Super-Miniature size and extremely lightweight.
  • Maximum flash sync speed 1/180(focal plane), or 1/350(leaf shutter).
  • Maximum range of 100 feet.
  • Advanced radio frequency technology.
  • Transmitter works 3 years on one coin cell battery.
  • Fires from the hotshoe of most digital and film cameras.
  • Receiver plugs directly into most strobes (no cables required).
  • Instant, automatic on/off power management.
  • Four channels with automatic synchronization.
  • Transmitter battery life up to 3 years!

The MicroSync Digital is the smallest, smartest wireless solution for firing strobes and cameras.

The Freedom of Wireless
Whether you’re shooting in the studio or on location, firing your strobes with a sync cord can be impractical, inconvenient, and sometimes even impossible. No longer/Not any more! The MicroSync Digital wireless strobe sync system allows you to fire strobes wirelessly. So liberate yourself from the limitations of your sync cord.

Ultra-small, Light and Convenient
The MicroSync Digital is revolutionary because it is super-miniature, extremely lightweight, and almost operates itself. Just place the transmitter in the hot shoe of your camera, plug the receiver into your strobe’s power pack and fire! It’s that easy.

Automatic Power Management
The MicroSync Digital has a unique automatic on/off power management system.

There are no on/off switches on the transmitter or receiver. When you press the shutter, the transmitter turns itself on, sends the signal to the receiver, then turns itself off – all in milliseconds. Because of this advanced power management system, the battery life of the coin cell in the transmitter is anticipated to be 3 years.

4 Channels
There are four channels on the MicroSync Digital to allow you to shoot without interference from other MicroSync users in close proximity.
 


 

 

 

 

 

 

 

Since 1945